Why Hot Water Not Coming Out of Faucet? What to Do?

Imagine that you wake up in the morning, walk towards the bathroom to brush your teeth and wash your face. You turn the tap on; there’s water flowing out of the tap just as usual, but as soon as you take your hand and put it under the water, you move it away. The water is freezing cold and hot water is not coming out of the faucet! If it never happened to you before then this situation can be very disturbing for you.

You ought to figure out what caused the hot water to stop so you can get it flowing back again. You have paid the electricity bill so that you can rule out the risk of being cut off by the water service provider. If everything was going perfectly, why did the hot water stop flowing out of the faucet? Let us help you with that!

What methods can run the flow of hot water? Five Effective Solutions:

Hot water on demand is a thing that we always take for granted. One of the hardest things a house owner can face is that they don’t have hot water in their house. There are various items that can be worn out or stopped working on your water heater, resulting in hot water not flowing out of the faucet.

Like many other home maintenance problems, a shortage of hot water at a specific faucet may have a primary, easy-to-fix source, or it could mean that you have to make a significant repair.

Nevertheless, very few options are accessible on the Internet and most of the methods are not well structured. Well, here is the thing. This article will surely help you out with this dilemma.

Here you’re going to have some strategies to solve this issue and get the hot water flowing back again from the faucet. If you follow them the way they are described, you will get yourself in a winning position.

If any of the hack does not get you at your destination, just give a quick shot to next one. Who knows which one works perfectly from whom!

1. Analyze The Obvious Sources of water blockage

The foremost essential thing is to have a look at some obvious stuff. But there’s no reason to get mad about it. It’s likely to overlook the obvious parts of the problem, but you can never reach the root cause of the situation without considering the mains.  

So at first, look at the other faucets in your house. Check the washroom faucets to see if the hot water is coming out of the shower faucet or not. If you can get hot water in other areas of your place, your water heater is okay and then you’re not going to have to think about that.

However, if the other places also don’t have hot water, then you’re going to have to fix the water heater.

Next, search and check the supply lines. If the supply lines are in a knotted form, they have a check valve. These valves will feel a rapid blast of water. And as a reaction, these valves may stop the flow of water. So, check it out.

Luckily, your problem will end with the very first method. And if these two strategies don’t work, you potentially have an obstruction.

2. Utilize the Reverse Cold Water Pressure

Now that we know that something is hindering your hot water flow, we will continue to make real efforts.

Even so, we need to survey to see if this approach applies to you or not. Switch off the cold-water supply at first. Now let the cartridge release. See if there’s hot water flowing out of the faucet. If still not, then the clot is in the main section of your faucet.

If this is the situation, we should go along with this step by step process.

And it is arranged in this way for better convenience. So let’s have a peek at the steps-

  • Switch the hot water source off.
  • Disable the hot water line from the inlet of your faucet.
  • See if the cold water connection is linked to the faucet.
  • Take a bucket and bring it under the inlet of the hot water faucet.
  • Use your finger or something like that to obstruct the end of the spigot. This is going to obstruct the outflow.
  • Turn the faucet on.
  • Set it in the center or turn it a little in the direction of hot water.
  • This is going to drive the water out of the faucet’s hot water inlet. As a result, the blockage would be forced to leave the way it came in.

3. Use A Wire to Restore Hot Water in Faucet

If the second approach doesn’t succeed, it means that we have to use more force. Here the manual pressure with a bit of technicality could operate better than the water pressure.

So just take a piece of wire, fold it in half, and start turning it. You’re going to find a U-loop at one end and a circular tail at the other.

Now, force the wire into the outlet of the faucet. Drive the tail portion into the opening of the faucet.

That being said, make sure that all the water sources are off in this process. And rotate the faucet knob to hot. This will help in the flowing of the hot water to the full.

Keep pressing the wire before it gets out of the hot water inlet. And the challenging part begins just after the tail part goes out.

Now, keep the tail tight and remove the wire fast. Luckily, the obstruction is going to come out.

4. Use A Compressor to Eliminite Water Blockage

If the hand power didn’t work, we’ve got to move it to the next level.

Here the aim is to use compressed air to remove the clot. There are, however, several problems with this method.

The compressed air can deliver an immense amount of force. And this force will destroy your faucet. So you ought to know the guidelines.

First, see how much water pressure your faucet can handle. You can obtain this info whether on the user manual or the company’s website.

Once you’ve found the limit level, write it down to someplace. Now insert the outlet of the compressor into the end of the spigot. Turn the faucet knob all the way to hot and activate the compressor.

Start from zero psi and gradually increase the strain. Bear the pressure cap in mind. Stop just before the limit. Luckily, the blockage is going to come out.

5. Use Vinegar to open up your Facuet

If the above solution didn’t work to bring the hot water flow out from the faucet, it means that your faucet is clogged with mineral sediment. However, to get this volume of mineral deposit clogged in, the faucet must be very old.

So how can you get rid of it? Well, the solution is pretty easy.

Remove all links from the faucet at first. Then take a bowl and pour in a bottle of Vinegar. Now, gently sink the faucet of yours into the Vinegar. Leave it that way for a whole night.

Pour the hot water manually through the faucet the next morning. You’re going to see the minerals coming out of the faucet with the water. Re-install the faucet back to its original spot. Hopefully, this will fix the issue.


Summing it up, hot water not flowing out of the faucet is a bit of an odd issue. You don’t have to worry or create panic when there’s no hot water coming out of your faucet. As you’ll see, water can be blocked for several purposes.

All you’ve got to do is to find the root of the problem and repair it. The hot water will start running out of the faucets again.

However, now you know how to fix it. If your faucet still doesn’t work after using all the five methods, just replace it. Many of the faucets come with a lifetime warranty. So, use it and stay relaxed!

Hopefully, this article will help you resolve this problem, and you’ll see the hot water flowing out of the faucets back just as normal!

Frequently Asked Questions

Why is there no water running out of the hot tap?

If there is no hot water coming out of the tap or the hot water supply is splashing, so the possible culprit is the airlock. As the name implies, this occurs because air is caught in water pipes, which are less dense than water. It can accumulate at high points on the pipes causing partial or full water obstructions.

Why am I not getting hot water in my bathroom?

If your issue was not with the anti-scalding machine, your shower mixing valve would most likely have gone terrible and would keep hot water from being properly mixed into your shower water.
Often, even if these valves are worn out, broken down, or wrongly installed, they can create uncomfortable temperatures for a shower in the bathroom.

Why does it take so long for the hot water to come out of the tap?

You turn the shower on and stay there waiting… and waiting and waiting… as all the water, time and money are wasted with the cold water going down the drain. It’s not an effective method to save water, and it also contributes to your water bill every month.
There are many explanations for this problem, such as the water heater’s location, the pipe thickness, and the water’s flow rate. Due to these reasons, at times, the shower water gets either too cold or too hot.
The more the hot water needs to run, the longer it takes to heat up the faucet of the shower. This is particularly true for bigger houses.

Why is my hot water not hot?

If there is no hot water coming out of the faucet, the issue may emerge from a lack of electricity, a defective electrical thermostat, or a defective upper electrical heat source. If the water is not warm enough, The issue could be a small water heater, a hot and cold crossed links, or a broken heater or thermostat.

How do I make my shower water hotter?

If the water temperature in your shower is not warm enough, monitor the water temp setting to make sure it is correctly set. Newer water heating systems may have had their heating components flawed or burnt out in some way. This can prevent a steady flow of hot water from flowing out of the faucet.

Leave a Comment