Touch vs Touchless faucet: Which is better?

It’s midnight, and you have a habit of sleepwalking. You get up in that state and use the kitchen sink faucet to have some water. Who knows if you’ll remember to turn the tap off in a sleepy state? Here you need to understand the difference between touch vs touchless faucet so that you don’t need to remember the hassle of turning the tap off in a sleepy state.

But suppose you forget that, so you know what the next thing which would happen is? Your water bill shoots up.

However, you wouldn’t be in this situation if you had a touchless faucet, which turns off as it senses the motion stopping around it.

Usually, we all use touch faucets in our homes, and we don’t give much thought to any advancements possible in this fixture of our kitchen and bath. However, this new motion sensor feature can significantly impact our daily lives, making it more convenient.

Think about how much water you would save if you install touchless faucets. Your children will not be wasting water while washing up as they tend to be careless about this. Water will only be discharged while they use the sink and not depend on them, turning it off responsibly.

There are numerous situations where a touchless faucet can come in handy. So in this article, we will weigh out the choice of Touch vs Touchless faucet for you. So without further delay, let’s get on with it.

How do Touchless faucets work?

Touchless faucets work with the help of motion sensors installed in them. You can turn them on and off by merely swiping your hands.

Its sensors will detect the motion from your hands and send a signal to its valve to turn it on and let the water flow through the faucet’s spout.

There are four essential components of touchless faucets which enables them to work. These components include the power source, sensor, solenoid valve, and spout.


As the sensor will detect activity/motion, it will signal the valve to turn the faucet on. Its function is to inform the valve about when to start the water and stop its flow with the presence and absence of activity/movement.

Sensors either use ultrasonic energy or infrared light to detect movement. In the case of infrared light, the sensor will usually be found at the base of the spout to distinguish activity or stillness easily.

Solenoid valve:

The Solenoid valve is activated after receiving the signal of motion from the sensor. The polarity of the signal indicates the valve whether to engage a push or a pull action. The valve uses a rubber-like disc to control the flow of water.

When the sensor observes motion, it will create a positive signal to be sent to the valve. When the valve picks up a positive signal, it will be pulled open, letting the water flow.

The solenoid uses its push action to close the valve when the negative signal is received as the motion stops. Otherwise, the valve will remain closed when there’s no signal of motion being received.

Power source

Touchless faucets do need power/electricity to function. You can connect it to electrical wall sockets or use batteries as a replacement. You should ensure that you buy the right power source for your touchless faucet system by reading the user manual in the faucet packaging.

A faucet powered by a battery will keep the valve open until a power flow closes it. However, a faucet that is transformer powered will keep the valve open by its continuous electric current. 


The spout contains the remaining components of a touchfree sink faucet. This piece of a tap can be made out of many different materials and is available in different shapes and sizes. All of this can be narrowed down by factors like your budget, the color scheme of your bathroom/kitchen, and the type of sink in question.

You can find spouts with nickel or chrome finishes, which will ensure extra durability and improve appearance. Otherwise, there are brass spouts, which tend to be more pricey. In contrast, zinc spouts are less expensive but still give a useful utility.

How does a touch faucet work?

The mechanics behind a reliant touch faucet is quite simple. They use a simple lever or a screw to create enough force to hold back the water from flowing continuously.

There are three components in a touch faucet; a pipe connected from the primary water source to the faucet for the inflow of water, the gear involving a stopper and a passageway, and another short pipe connecting the passageway to the outlet of the faucet.

The mechanism followed by touch faucets in controlling the water flow takes two types; Twisting and lifting mechanisms. These essentially imply the idea of either ‘twisting’ or ‘lifting’ the tap’s stopper open.

Twist-based faucets

The handles used in a twisting mechanism setting has a spiral device plugged into a hole, slowly twisted in and out to cut and let the water out. This mechanism makes it easier to control the water flow as it only moves the stopper by a fraction of an inch for each revolution of the handle.

Lift-based faucets

The lifting mechanism is basically the same concept as one and only difference, a lever that goes up and down the gap to control the water flow. The method is close to the twisting approach but not as precise as to control the tap/water flow better.

If you already have a touch or touchless faucets but the water pressure is quite low, then read our guide on how to increase water pressure without using any kind of pump.

Know the difference – touch vs touchless faucet

A touch faucet functions by touching the tap to turn it on-off by yourself, while a touchless faucet relieves you of that hassle and automatically works on your hand’s movement. Both touch and touchless faucets are a kind of technological advancement in your kitchen and bathroom fixtures and can be efficient in many ways compared to the regular tap.

If you want to have more control over the tap, then a touch faucet is better. Both types can be handy considering your preference and given conditions.

You may get confused about which one to choose. So consider weighing the pros and cons of both types. We’ve done the job of gathering the prospects and drawbacks of both the categories for you to make the right choice.

Advantages of a touchless faucet

More efficient water usage

If your family has little children, you may know that they can cause water wastage by playing with the taps and how hard it is to control water wastage in that case. Perhaps you forget to turn it off when you get busy with other chores.

Your pet dog or cat may also try to mess with taps and accidentally turn them on, and before you know it, the numbers on your bill get mysteriously high.

Furthermore, if you want to use hot water with touch faucets, you will have to test the temperature by running some water. While if overheats, you will need to turn on the cold water tap and waste some more water to adjust your preferred temperature.

All of this will never happen if you have a touchless faucet installed to preset the temperature. Not only extra water wastage will be reduced, but its efficiency would go as far as saving every bit of water in between the breaks you take while placing each dish after washing them. Your bills would be substantially contained.

Just go through the article of advantages of kitchen faucet if you want to know more about it

Hygienic importance

Touchless faucets are more hygienic when it comes to preventing the spread of germs compared to touch sensitive faucets. You contact the tap frequently with touch sensor faucets. This will lead to the faucet being possibly contaminated with germs that can spread elsewhere, including the utensils.

Now, this may mean that your food gets contaminated as well, even if slightly. But you can never be sure of which germs may be dangerous enough to cause infections that may be sitting on your faucets and end up in your mouths.

If not for food, you can get germs to reach others who use the taps with touch faucets. All of this can be avoided with touch sensor faucets. Think about how you can prevent any soap or grease from reaching the utensils.

It is thus cleaner and more hygienic than to use a touch sensitive kitchen faucet, especially now that the coronavirus has taken over the world.

Related: Difference between Pull down and Pull out Faucet

Clean and tidy counter/space

As you use touch on faucet, you will ultimately end up dripping water when you turn off the tap. If not you, your kids will end up splashing water all over the counter when the mood strikes. One way or another, your counter area or bathroom mirror will be wet and full of droplet stains.

You may also cause the sink faucet to get dirty as you make contact with a dirty hand to turn it on or off. Over time, that grime will accumulate on the faucet itself. This may never happen in the case of a touch sensitive kitchen faucet.

This may give an impression of untidiness, and you’ll need to wipe off the splashed water and dirt build-ups every now and then.

It’s already a hassle to keep things clean and organized, so why not give yourself a break on this through a touchless faucet? It could mean a neat counter at all times without you having to do much about it yourself.

Easy operation and access

People having arthritis can find this feature incredibly convenient in handling faucets. Older people with painful ailments could also benefit from faucet handling made more comfortable with this new feature.

It is much more user friendly and easy to handle for almost everyone. Just move your hand, and it’ll do the job. Simple as that.

Indeed, we can say that the touchless version faucet is one of the best faucets for old people.

Limitations of touchless faucets:

Malfunction possible when close to other sensors

Bright light or reflective surfaces might not work well with the infrared sensors installed in a touchless faucet. The sensor might miss-signal the faucet to turn on accidentally from time to time.

The user needs to be read the user manual and follow the instructions carefully at the installation time.

Avoid! Installing the touchless faucets near any other kind of sensors or directly above reflective surfaces.

High installation cost and reliance on power

The sensors inside hands-free faucets rely on electricity to function. If the power goes out, these faucets won’t work. You cannot turn the tap on and access water in that situation.

Plus, using electricity is an increased side expense of this widget. It will also be costly for a one-time fixture and can increase your electric bill even if by a small proportion.

Benefits of touch on faucets:

Does not accidentally go off

If you want to control the tap, then touch faucets give you that function. It would not make sensor mistakes, unlike touchless faucets. So it won’t cause that type of water wastage.

Comparatively inexpensive

As it doesn’t rely on electricity, it will be inexpensive in the long term and in the initial investment. Touch faucets do not contain advanced touchless features, and thus they don’t cost a lot.

These benefits may take your attention and consideration to buy them. Anyways, if you make up your mind to buy them but confused about which one you should buy, then check out our detailed, unbiased review of several touch kitchen faucets to get the reliable faucet according to your needs by clicking this button.

Read: Best touch kitchen faucets

Drawbacks of touch-on faucets:

Less efficient water usage

Unlike touchless faucets, touch taps are less efficient in saving water. You cannot go without wasting water in touch faucets. You cannot manage accidental water wastages because you may forget to turn it off, or maybe your kids or pets create a mess.

Harder to maintain

It is harder to maintain a touch faucet and keep it from getting dirty or clogged. It is harder to maintain the kitchen’s neatness, bathroom counters, or basins when water can be splashed around everywhere.

These are all the pros and cons of both types of faucets in question. You can notice that touchless faucets outweigh in benefits when compared to touch reliant faucets.



Here is all you need to know about touch vs touchless faucet and their differences. We have weighed the choices for you so you can make the best purchase.

We personally like and prefer touchless faucets because of their extended functionality and added features. Yet, it depends upon your preferences and requirements which faucet type you want for your kitchen or bathroom.

The brands listed are ensured to provide you with the best and most reliable touch as well as touchless faucets. So don’t budge and give these advanced features of both types of faucets a little try. It may be a bit costly, but it’s worth all the money.

Leave a Comment